Bell and Howell Enduro Inserters For Sale – $25,000 each.

Symco Group has a customer who has two Bell and Howell ten station Enduro Inserters with Jet Vision cameras, high cap feeders and on edge conveyors for immediate sale.

If you have interest in one or both of the Bell and Howell Enduro Inserters, please contact Symco Group at 800-878-8002 or email us at info@symcogroup.com.

Bell and Howell Enduro Overview:

The Enduro inserting system will operate at speeds up to 11,000 envelopes per hour, depending on the configuration. These processing speeds make the Enduro inserting system a formidable solution for operations that process high volumes of one- to multiple- page, statement-type jobs in any environment where numerous applications are run on a regular basis.

Based on BÖWE BELL + HOWELL’s industry-renowned gripper-arm inserting technology and powered by the KOMPOS control system, the Enduro inserting system represents a new evolution in inserting technology.

Thanks to the integrated KOMPOS microprocessor and its plug-and-play design, the Enduro inserting system bring a new level of modularity to BÖWE BELL + HOWELL’s proven gripper-arm inserting technology. This opens the door to a broad and diverse range of add-on modules that can easily be integrated with the base system, including BÖWE BELL + HOWELL’s new line of dual-channel and cut-sheet feeders.

These modules, each with their own KOMPOS controller, communicate continously with the operating system to ensure complete mail piece integrity while improving performance levels by up to 40 percent on certain applications.

The Enduro inserting system features an integrated, intelligent learning technology known as Smart GRIP (Grip Remember Inform & Pull). With Smart GRIP, operators can activate a “teach” command through the user interface. In this mode, the gripper arm “reads” an insert, “remembers” the reference values and “reports” the thickness of the enclosures to the operating system.

As a job proceeds, each of the enclosures is compared to the stored values, and any processing errors—such as double pulls or misses are immediately identified. Since the operator can set the job to automatically bypass the mailpiece, use a backup enclosure feeeders, or stop for inspection integrity is enhanced and throughput maximized.

In addition to Smart GRIP, the Enduro inserting system offers pneumatic gripper arms. The pneumatic gripper arms, which can replace or be used in conjunction with the standard gripper arms, greatly increase the Enduro’s performance when processing difficult materials.

The Enduro inserting system may be configured with up to 24 insert stations. All enclosure feeders can be pneumatic, standard or any combination of both.

Additional improvements to the Enduro inserting system include:

  • Intelligent tracking throughout the document path
  • High-capacity envelope loader and high-capacity insert feeders
  • A redesigned insertion station
  • A new operating system and user interface
  • A high-volume, on-edge output conveyor

One system, multiple uses

The Enduro inserting system is built on BÖWE BELL + HOWELL’s modular design philosophy. This unique approach allows each system to be configured based on a customer’s specific requirements while affording the flexibility to add new capabilities as those needs evolve.

There are currently more than 100 paper-handling modules that can interface with the Enduro inserting system, ranging from roll feeders and continuous-form cutters to sheet feeders and heavy-duty folders. This multi-tool approach offers a greater freedom to process a growing number of jobs and enclosures while protecting their initial investments in technology.

Enhanced document integrity

To supplement the Enduro system checks for document tracking and integrity, BÖWE BELL + HOWELL’s VEKtor reading system can be added throughout the inserter. With VEKtor in place, barcodes can be read at the feeder and inserts verified in the hopper to ensure everything matches before continuing through the system. With VEKtor any code symbology is supported including the Intelligent Mail Barcode (iMB).

Highlights

  • Smart GRIP technology immediately identifies problem mailpieces
  • Pneumatic gripper arms increase ability to process difficult materials
  • Improved tracking of each mailpiece
  • Numerous add-on modules seamlessly work with the inserter

Features and specifications

  • Acceptable envelope sizes
    • Minimum—6” x 3.5” (152 mm x 89 mm)
    • Maximum—10”x 6.25” (254 mm x 159 mm)
    • Flap depth—1” to 2.31” (25 mm x 59 mm)
  • Acceptable insert sizes
    • Minimum—5.5” x 3” (140 mm x 76 mm)
    • Maximum—9.5” x 6” (241 mm x 152 mm)
    • Maximum thickness—0.125” (3mm)
  • Input Processing Options
  • Sheet Feeders—591, 598
  • Cutters—310, 310 Stream, 380 Stream, 5410
  • Reading—2/5-I, 3/9, Code128, ECC200, OCR, Intelligent Mail barcode
  • Multi-channel input/matching capability
  • PCS input channels
  • Fold Options (Z, Half, Double Parallel and Letter)
  • Delivery Options
    • Envelope Turnover
    • Metering (fixed and variable weights)
    • Diverting
    • Envelope marking
    • High capacity envelope feeder option
    • Extended and on-edge conveyor options
    • Ink-jet printing
    • Envelope window reading (barcode, 2D and OCR)

Pitney Bowes DI-950 Tabletop Inserter For Sale…

Symco Group has a client who is selling their Pitney Bowes DI-950 tabletop inserter.

If you are interested in purchasing this inserter, please contact Symco Group immediately at 800-878-8002 or email info@symcogroup.com.

Pitney Bowes DI-950 Table Top Inserter 2

Pitney Bowes DI-950 Overview

  • Productivity
    • Load-on-the-fly – no need to stop to reload feeders 
    • High capacity envelope feeder – allows jobs to run faster and reduces reloading requirements
    • High capacity sheet feeders- can be linked to provide greater capacity and require less reloading
    • A range of stacker options are available to accommodate high volume output
    • Connectivity – the DI950 connects to Pitney Bowes DM Series mailing machines for in-line production and increased productivity
  • Ease of Use
    • PacPilot Colour User Interface – applications are easy to set-up, edit and modify
    • SwiftStart – intelligent job processing for the casual user 
    • Speedy problem resolution with clear, precise guidance displayed on the screen
    • Smart nip folding element – automatically adjusts the folder settings for different jobs
  • Flexibility
    • Flexible Tower feeders – interchangeable trays allow you to run a wide range of sheets and inserts
    • Pre-fold accumulator – to enhance the mail piece presentation • Wide variety of materials accepted to meet the creative requirements of today’s mailing applications
  • Security and Integrity
    • Trial piece to confirm accuracy before the job is run 
    • Double Document Detection – ensures every mail piece is accurate
    • Latest scanning technology to add value to ‘intelligent’ mailing applications
    • Unique automatic envelope aligner – adjusts the envelope position relative to the mail pieces to ensure accurate, error free inserting

Pitney Bowes DI-950 Tabletop Inserter

DI950 Specifications:

  • Dimensions:
    • L 2260mm x D 580mm x H 785mm (min)
  • Weight:
    • 103kg (min)
  • Speed:
    • Maximum of 5,400 cycles/hour
  • Noise:
    • 73dbA (max)
  • Power:
    • 240V, 50Hz
  • Volume:
    • 120,000 per month
  • Fold Types:
    • Half, C, Z, Double and Parallel
  • Fold Capacity:
    • 7 sheets maximum
  • Feeder Capacity:
    • Sheets: 350
    • Envelopes: 250
    • Inserters: 350
    • Flat Envelopes: 100
  • Flat Envelope Inserting:
    • 25 sheet maximum
  • Material:
    • Sheets:
      • Min 127mm x 170mm, Max 250mm x 356mm / 60-166gsm, 325 sheets of 80gsm paper
    • Inserts:
      • Min 127mm x 72mm, Max 250mm x 152mm / 60-166gsm, 2.54mm max thickness
    • Envelopes:
      • Min 162mm x 88mm, Max 266mm x 164mm / 70-90gsm

 

 

 

Bell and Howell Enduro’s For Sale (Qty 2)

Symco Group has a customer who has two Bell and Howell ten station Enduro Inserters with Jet Vision cameras, high cap feeders and on edge conveyors for immediate sale.

If you have interest in one or both of the Bell and Howell Enduro Inserters, please contact Symco Group at 800-878-8002 or email us at info@symcogroup.com.

Bell and Howell Enduro Overview:

Bell and Howell Enduro Inserter

The Enduro inserting system will operate at speeds up to 11,000 envelopes per hour, depending on the configuration. These processing speeds make the Enduro inserting system a formidable solution for operations that process high volumes of one- to multiple- page, statement-type jobs in any environment where numerous applications are run on a regular basis.

Based on BÖWE BELL + HOWELL’s industry-renowned gripper-arm inserting technology and powered by the KOMPOS control system, the Enduro inserting system represents a new evolution in inserting technology.

Thanks to the integrated KOMPOS microprocessor and its plug-and-play design, the Enduro inserting system bring a new level of modularity to BÖWE BELL + HOWELL’s proven gripper-arm inserting technology. This opens the door to a broad and diverse range of add-on modules that can easily be integrated with the base system, including BÖWE BELL + HOWELL’s new line of dual-channel and cut-sheet feeders.

These modules, each with their own KOMPOS controller, communicate continously with the operating system to ensure complete mail piece integrity while improving performance levels by up to 40 percent on certain applications.

The Enduro inserting system features an integrated, intelligent learning technology known as Smart GRIP (Grip Remember Inform & Pull). With Smart GRIP, operators can activate a “teach” command through the user interface. In this mode, the gripper arm “reads” an insert, “remembers” the reference values and “reports” the thickness of the enclosures to the operating system.

As a job proceeds, each of the enclosures is compared to the stored values, and any processing errors—such as double pulls or misses are immediately identified. Since the operator can set the job to automatically bypass the mailpiece, use a backup enclosure feeeders, or stop for inspection integrity is enhanced and throughput maximized.

In addition to Smart GRIP, the Enduro inserting system offers pneumatic gripper arms. The pneumatic gripper arms, which can replace or be used in conjunction with the standard gripper arms, greatly increase the Enduro’s performance when processing difficult materials.

The Enduro inserting system may be configured with up to 24 insert stations. All enclosure feeders can be pneumatic, standard or any combination of both.

Additional improvements to the Enduro inserting system include:

  • Intelligent tracking throughout the document path
  • High-capacity envelope loader and high-capacity insert feeders
  • A redesigned insertion station
  • A new operating system and user interface
  • A high-volume, on-edge output conveyor

One system, multiple uses

The Enduro inserting system is built on BÖWE BELL + HOWELL’s modular design philosophy. This unique approach allows each system to be configured based on a customer’s specific requirements while affording the flexibility to add new capabilities as those needs evolve.

There are currently more than 100 paper-handling modules that can interface with the Enduro inserting system, ranging from roll feeders and continuous-form cutters to sheet feeders and heavy-duty folders. This multi-tool approach offers a greater freedom to process a growing number of jobs and enclosures while protecting their initial investments in technology.

Enhanced document integrity

To supplement the Enduro system checks for document tracking and integrity, BÖWE BELL + HOWELL’s VEKtor reading system can be added throughout the inserter. With VEKtor in place, barcodes can be read at the feeder and inserts verified in the hopper to ensure everything matches before continuing through the system. With VEKtor any code symbology is supported including the Intelligent Mail Barcode (iMB).

Highlights

  • Smart GRIP technology immediately identifies problem mailpieces
  • Pneumatic gripper arms increase ability to process difficult materials
  • Improved tracking of each mailpiece
  • Numerous add-on modules seamlessly work with the inserter

Features and specifications

  • Acceptable envelope sizes
    • Minimum—6” x 3.5” (152 mm x 89 mm)
    • Maximum—10”x 6.25” (254 mm x 159 mm)
    • Flap depth—1” to 2.31” (25 mm x 59 mm)
  • Acceptable insert sizes
    • Minimum—5.5” x 3” (140 mm x 76 mm) 
    • Maximum—9.5” x 6” (241 mm x 152 mm)
    • Maximum thickness—0.125” (3mm)
  • Input Processing Options
  • Sheet Feeders—591, 598
  • Cutters—310, 310 Stream, 380 Stream, 5410
  • Reading—2/5-I, 3/9, Code128, ECC200, OCR, Intelligent Mail barcode
  • Multi-channel input/matching capability
  • PCS input channels
  • Fold Options (Z, Half, Double Parallel and Letter)
  • Delivery Options
    • Envelope Turnover
    • Metering (fixed and variable weights)
    • Diverting
    • Envelope marking
    • High capacity envelope feeder option
    • Extended and on-edge conveyor options
    • Ink-jet printing
    • Envelope window reading (barcode, 2D and OCR)

Kirk Rudy Tabber Model KR535

Symco Group has a client with a Kirk Rudy Tabber Model KR535 for sale.

If you have any interest, please contact Symco Group today at 800-878-8002 or email us at info@symcogroup.com.

KIRK RUDY KR535 SPECIFICATIONS:

Physical:

Length

50”

127 cm

Width

26”

66 cm

Height

70”

178 cm

Tabletop height

33”

84 cm

Crated Weight

800 lbs

363 kg

Electrical Requirements:

 

Electrical Requirements

Voltage

Amps

Hz

120 VAC

15

20/30

Maximum Operating Speeds:

 

Single Tabbing

30,000 pieces / hour

Double Tabbing

30,000 pieces / hour

Tab Head Specifications:

Length

29”

74 cm

Width

36.5”

93 cm

Height

14”

35 cm

Crated Weight

120 lbs

54 kg

Material Handling:

Tabs

Labels

Minimum: .75 round

Minimum: .38”W x.75”L

Maximum: 2.0 round

Maximum: 3”W x 2”L STD

**Tab Base Specifications

Length

50”

113 cm

Width

33”

84 cm

Height

26”

66 cm

Crated Weight

780 lbs

350 kg

Options:

5” base height adjustment (Hydra-li )

Narrow (1.25”) product handling

5” wide label kit

Fan-fold label kit

Magnetized label kits

Material Handling

Min Stock Size

Max Stock Size

ickness

3’ x 5’

13” W x 14”L (labeling only) 11”W x 14”L (tabbing/ labeling)

Single sheet up to .18” (.62” labeling only)

Bell and Howell Mailstars Swing Arm Inserters For Sale

Symco Group buys and sells Bell and Howell Mailstar Swing Arm Inserters.

Bell and Howell Mailstar 500

Symco Group will provide a Bell and Howell Mailstar configured to meet your needs.

Call Symco Group today at 800-878-8002 or email us at info@symcogroup.com to purchase your next Bell and Howell Swing Arm Inserter.

Models:

  • Mailstar 350
  • Mailstar 400
  • Mailstar 450
  • Mailstar 500
  • Mailstar 2000
  • Pinnacle
  • Mailstar 10000

Inserter Stations:

  • 4 Inserts
  • 6 Inserts
  • 8 Inserts
  • 10 Inserts
  • 12 Inserts
  • or more…

Options:

  • Turnovers
  • Diverts
  • Conveyors
  • Meter Stand
  • Feeder
  • Accumulator Feeder Folder
  • Intelligence (2D, OMR, IMB, Etc)
  • Verification
  • Selective Feed
  • Print

Services:

  • Installation
  • Deinstallation
  • Rebuild
  • Parts

 

 

 

Addressing Printers – Wanted!

Symco Group is in the market to purchase your working used Addressing Printer. If you have one or more units you are looking to sell, please contact Symco Group at 800-878-8002 or email us at info@symcogroup.com.

Addressing Printers We Purchase:

  • Secap
    • Secap SA3000
    • Secap SA3100
    • Secap SA3150
    • Secap SA3300
    • Secap SA3350
    • Secap SA5300
    • Secap SA5350
    • Secap Jet 1
    • Secap / Pitney Bowes DA50S
    • Secap / Pitney Bowes DA70S
    • Secap / Pitney Bowes DA80F
  • Accufast
    • Accufast P4
    • Accufast P8
    • Accufast PMx
  • Neopost
    • Neopost AS-830
  • Hasler
    • Hasler HJ930

NBS Technologies – Horizon High Volume Card Personalization Demo Machine Sale

NBS Technologies Horizon High Volume Card Personalization March Demo Promotion.

Customer must accept shipment by 3-31-16. Demo machines will have minor scuffs and scratches.

Promotional Price: $243,000.00 (Price is less than dealer price). Price does not include shipping and handling.

Contact Symco Group today at 800-878-8002 or email us at info@symcogroup.com to purchase your next NBS Technologies Horizon High Volume Card Personalization System.

NBS Technologies Horizon Demo Machine Sale

Horizon Demo Configuration:

  • Input (2 – 500 card magazines)
  • HD Magnetic Stripe Encoding
  • 12 Contact Station Smart Card (NBS Couplers)
  • High Speed Top Mono Printer
  • HD Embosser
  • HD Embosser with Front Indent (includes Visa Electron Front Indent Type Set)
  • HD Embosser with Rear Indent (includes MasterCard Rear Indent 0-9)
  • Tipper
  • Output (2 – 250 Embossed Card Magazines)

NBS Horizon High Volume Card Personalization System Overview:

You demand innovation, choice, flexibility, and a smarter way of doing business. NBS gives you all the advantages you want with the Horizon, one of the most complete end-to-end card issuance systems available.

The Horizon card personalization system is designed to be both scalable and flexible. The vast array of Card Personalization Elements (“CPE”) offered on the Horizon platform meet the current and future needs of the mid to high volume card personalization markets. The built-in flexibility of the Horizon allows for seamless customization as production requirements change.

The Horizon offers these key features and benefits:

Cost Per Card

Orange Cards

The single most important metric to most card personalization experts is cost per card. The Horizon platform achieves a significant advantage over competitive products in its range when it comes to cost per card. The Horizon’s performance, reliability and spare parts/consumable pricing yield the industries lowest cost per card.

Flexibility

Connected Circles

The Horizon hardware platform coupled with the SmartSys machine control software combines to make the NBS card personalization system simple to setup and operate while maintaining ultimate flexibility. The power of SmartSys is compatible with a wide variety of data formats and offers powerful yet easy to use tools such as a JDM (card design/ layout), machine performance statistics, audit trail tools that provide full traceability and a powerful set of machine diagnostic capabilities.

Cost of Ownership

Three Octogons

This fully customizable, modular sys- tem is proven to provide one of the lowest cost of ownership in the industry. The Horizon is designed with performance, reliability, cost and service- ability in mind. NBS offers a wide range of cost effective product support services ranging from full on-site support to unlimited access to a global team of product support specialists. If cost of ownership is important to you, then the Horizon is the ideal choice for your mid to high volume card personalization system.

Smart Cards

Technical Specifications

The following details the Card Personalization Elements (“CPE”) available on the Horizon platform. The technical experts and sales teams at NBS know how to keep you up to speed with the rapidly changing card personalization market— whether you need assistance in facilitating a smooth migration from magnetic stripe to chip card technology or a quick response regarding any other card personalization concern. For expert advice and hassle-free support, the answer to your hardware, software, training, and maintenance issues is one phone call away.

  • INPUT CPE:
    • Includes two removable “quick change” magazines each with a 250 card capacity which means faster and easier card handling including pre-loading of blank cards. The Horizon has the flexibility to be configured with up to three input CPEs (6 Magazines total).
  • MAGNETIC STRIPE ENCODER CPE:
    • Several different encoding types are offered such as, 300 & 2750 Dualco and 600 Oe (for JIS A, B, C options). Other coercively values may be available on a special order basis for an additional charge. Multiple encoder CPEs can be installed for user flexibility.
  • HIGH SPEED SMART CARD CPE:
    • Uses an elegant, elevator mechanism to simultaneously personalize up to 12 contact smart card stations in a single CPE. The Horizon smart card CPE utilizes the NBS proprietary coupler. The cycle time for personalizing is reduced by the number of stations. The selection of the number of stations is dependent upon the maximum anticipated programming time per card as well as the throughput rate of the particular Horizon configuration.
  • CONTACTLESS CARD CPE:
    • This single station Contactless card CPE supports ISO 14443 type A & B as well as the Mifare range of cards. The CPE combined with SmartSys MCS software can also be used in readback and look up mode.
  • COLOR GRAPHICS CPE:
    • Provides clear, crisp photo quality color images at a high throughput rate of over 700 cards per hour. This CPE has one of the best resolutions in the industry at 300 dots per inch (“dpi”). It can print in color or monochrome as well as applying overlay to multiple selected areas or the entire card for the entire run.
  • LAMINATOR CPE:
    • The heated roller laminate CPE enables a laminate material to be applied to the surface of a card providing increased security and durability. A special laminate material is applied to the card surface using pressure and heat. The speed and temperature required is determined by the composition of the card being used.
  • EMBOSSER CPE:
    • The Horizon will support up to 3 separate embossers. Software automatically divides work between multiple embossers for optimal throughput. A front or rear indenter available — tailor the system to the user’s requirements.
  • TIPPER CPE:
    • The Horizon supports multiple tippers for faster/ easier production. The tipper’s reliable plate design allows for a maximum of 11 lines on a card. The tipper also has an integrated low foil sensor.
  • CARD LABELER CPE:
    • Applies labels to the front of a card. It works with any activation labels designed for use with plastic cards, on a 3-inch core, an outside diameter no larger than 8 inches in diameter and with bottom-off-first orientation.
  • CARD FLIPPER CPE:
    • Adds a greater degree of flexibility to the Horizon. Adding a flipper right before the stacker correctly orients the cards for placement into down stream equipment. The flipper CPE also enables the application of both front and rear laminates (Polyester Patch).
  • CARD STACKER CPE:
    • Includes two removable “quick change” magazines each with a 250 embossed card capacity. The Horizon has the flexibility to be configured with up to three stacker CPEs (6 Magazines total).
  • TRANSPORT CPE:
    • The Transport CPE can be used preserve CPE spaces for the future upgrades or can used with optional User Pro SDK to integrate non NBS hardware elements. The Transport CPE is a high throughput Horizon element, which can be ordered at time of purchase or field installed into existing systems.
  • OPTIONAL MAILER:
    • The addition of the Horizon mailer solution gives you the complete functionality of card personalization from start to envelope! Now you can personalize your cards and have them inserted into mail ready format giving you a totally automated card personalization solution.