Bell and Howell Enduro Inserters For Sale – $25,000 each.

Symco Group has a customer who has two Bell and Howell ten station Enduro Inserters with Jet Vision cameras, high cap feeders and on edge conveyors for immediate sale.

If you have interest in one or both of the Bell and Howell Enduro Inserters, please contact Symco Group at 800-878-8002 or email us at info@symcogroup.com.

Bell and Howell Enduro Overview:

The Enduro inserting system will operate at speeds up to 11,000 envelopes per hour, depending on the configuration. These processing speeds make the Enduro inserting system a formidable solution for operations that process high volumes of one- to multiple- page, statement-type jobs in any environment where numerous applications are run on a regular basis.

Based on BÖWE BELL + HOWELL’s industry-renowned gripper-arm inserting technology and powered by the KOMPOS control system, the Enduro inserting system represents a new evolution in inserting technology.

Thanks to the integrated KOMPOS microprocessor and its plug-and-play design, the Enduro inserting system bring a new level of modularity to BÖWE BELL + HOWELL’s proven gripper-arm inserting technology. This opens the door to a broad and diverse range of add-on modules that can easily be integrated with the base system, including BÖWE BELL + HOWELL’s new line of dual-channel and cut-sheet feeders.

These modules, each with their own KOMPOS controller, communicate continously with the operating system to ensure complete mail piece integrity while improving performance levels by up to 40 percent on certain applications.

The Enduro inserting system features an integrated, intelligent learning technology known as Smart GRIP (Grip Remember Inform & Pull). With Smart GRIP, operators can activate a “teach” command through the user interface. In this mode, the gripper arm “reads” an insert, “remembers” the reference values and “reports” the thickness of the enclosures to the operating system.

As a job proceeds, each of the enclosures is compared to the stored values, and any processing errors—such as double pulls or misses are immediately identified. Since the operator can set the job to automatically bypass the mailpiece, use a backup enclosure feeeders, or stop for inspection integrity is enhanced and throughput maximized.

In addition to Smart GRIP, the Enduro inserting system offers pneumatic gripper arms. The pneumatic gripper arms, which can replace or be used in conjunction with the standard gripper arms, greatly increase the Enduro’s performance when processing difficult materials.

The Enduro inserting system may be configured with up to 24 insert stations. All enclosure feeders can be pneumatic, standard or any combination of both.

Additional improvements to the Enduro inserting system include:

  • Intelligent tracking throughout the document path
  • High-capacity envelope loader and high-capacity insert feeders
  • A redesigned insertion station
  • A new operating system and user interface
  • A high-volume, on-edge output conveyor

One system, multiple uses

The Enduro inserting system is built on BÖWE BELL + HOWELL’s modular design philosophy. This unique approach allows each system to be configured based on a customer’s specific requirements while affording the flexibility to add new capabilities as those needs evolve.

There are currently more than 100 paper-handling modules that can interface with the Enduro inserting system, ranging from roll feeders and continuous-form cutters to sheet feeders and heavy-duty folders. This multi-tool approach offers a greater freedom to process a growing number of jobs and enclosures while protecting their initial investments in technology.

Enhanced document integrity

To supplement the Enduro system checks for document tracking and integrity, BÖWE BELL + HOWELL’s VEKtor reading system can be added throughout the inserter. With VEKtor in place, barcodes can be read at the feeder and inserts verified in the hopper to ensure everything matches before continuing through the system. With VEKtor any code symbology is supported including the Intelligent Mail Barcode (iMB).

Highlights

  • Smart GRIP technology immediately identifies problem mailpieces
  • Pneumatic gripper arms increase ability to process difficult materials
  • Improved tracking of each mailpiece
  • Numerous add-on modules seamlessly work with the inserter

Features and specifications

  • Acceptable envelope sizes
    • Minimum—6” x 3.5” (152 mm x 89 mm)
    • Maximum—10”x 6.25” (254 mm x 159 mm)
    • Flap depth—1” to 2.31” (25 mm x 59 mm)
  • Acceptable insert sizes
    • Minimum—5.5” x 3” (140 mm x 76 mm)
    • Maximum—9.5” x 6” (241 mm x 152 mm)
    • Maximum thickness—0.125” (3mm)
  • Input Processing Options
  • Sheet Feeders—591, 598
  • Cutters—310, 310 Stream, 380 Stream, 5410
  • Reading—2/5-I, 3/9, Code128, ECC200, OCR, Intelligent Mail barcode
  • Multi-channel input/matching capability
  • PCS input channels
  • Fold Options (Z, Half, Double Parallel and Letter)
  • Delivery Options
    • Envelope Turnover
    • Metering (fixed and variable weights)
    • Diverting
    • Envelope marking
    • High capacity envelope feeder option
    • Extended and on-edge conveyor options
    • Ink-jet printing
    • Envelope window reading (barcode, 2D and OCR)

Bell and Howell Enduro’s For Sale (Qty 2)

Symco Group has a customer who has two Bell and Howell ten station Enduro Inserters with Jet Vision cameras, high cap feeders and on edge conveyors for immediate sale.

If you have interest in one or both of the Bell and Howell Enduro Inserters, please contact Symco Group at 800-878-8002 or email us at info@symcogroup.com.

Bell and Howell Enduro Overview:

Bell and Howell Enduro Inserter

The Enduro inserting system will operate at speeds up to 11,000 envelopes per hour, depending on the configuration. These processing speeds make the Enduro inserting system a formidable solution for operations that process high volumes of one- to multiple- page, statement-type jobs in any environment where numerous applications are run on a regular basis.

Based on BÖWE BELL + HOWELL’s industry-renowned gripper-arm inserting technology and powered by the KOMPOS control system, the Enduro inserting system represents a new evolution in inserting technology.

Thanks to the integrated KOMPOS microprocessor and its plug-and-play design, the Enduro inserting system bring a new level of modularity to BÖWE BELL + HOWELL’s proven gripper-arm inserting technology. This opens the door to a broad and diverse range of add-on modules that can easily be integrated with the base system, including BÖWE BELL + HOWELL’s new line of dual-channel and cut-sheet feeders.

These modules, each with their own KOMPOS controller, communicate continously with the operating system to ensure complete mail piece integrity while improving performance levels by up to 40 percent on certain applications.

The Enduro inserting system features an integrated, intelligent learning technology known as Smart GRIP (Grip Remember Inform & Pull). With Smart GRIP, operators can activate a “teach” command through the user interface. In this mode, the gripper arm “reads” an insert, “remembers” the reference values and “reports” the thickness of the enclosures to the operating system.

As a job proceeds, each of the enclosures is compared to the stored values, and any processing errors—such as double pulls or misses are immediately identified. Since the operator can set the job to automatically bypass the mailpiece, use a backup enclosure feeeders, or stop for inspection integrity is enhanced and throughput maximized.

In addition to Smart GRIP, the Enduro inserting system offers pneumatic gripper arms. The pneumatic gripper arms, which can replace or be used in conjunction with the standard gripper arms, greatly increase the Enduro’s performance when processing difficult materials.

The Enduro inserting system may be configured with up to 24 insert stations. All enclosure feeders can be pneumatic, standard or any combination of both.

Additional improvements to the Enduro inserting system include:

  • Intelligent tracking throughout the document path
  • High-capacity envelope loader and high-capacity insert feeders
  • A redesigned insertion station
  • A new operating system and user interface
  • A high-volume, on-edge output conveyor

One system, multiple uses

The Enduro inserting system is built on BÖWE BELL + HOWELL’s modular design philosophy. This unique approach allows each system to be configured based on a customer’s specific requirements while affording the flexibility to add new capabilities as those needs evolve.

There are currently more than 100 paper-handling modules that can interface with the Enduro inserting system, ranging from roll feeders and continuous-form cutters to sheet feeders and heavy-duty folders. This multi-tool approach offers a greater freedom to process a growing number of jobs and enclosures while protecting their initial investments in technology.

Enhanced document integrity

To supplement the Enduro system checks for document tracking and integrity, BÖWE BELL + HOWELL’s VEKtor reading system can be added throughout the inserter. With VEKtor in place, barcodes can be read at the feeder and inserts verified in the hopper to ensure everything matches before continuing through the system. With VEKtor any code symbology is supported including the Intelligent Mail Barcode (iMB).

Highlights

  • Smart GRIP technology immediately identifies problem mailpieces
  • Pneumatic gripper arms increase ability to process difficult materials
  • Improved tracking of each mailpiece
  • Numerous add-on modules seamlessly work with the inserter

Features and specifications

  • Acceptable envelope sizes
    • Minimum—6” x 3.5” (152 mm x 89 mm)
    • Maximum—10”x 6.25” (254 mm x 159 mm)
    • Flap depth—1” to 2.31” (25 mm x 59 mm)
  • Acceptable insert sizes
    • Minimum—5.5” x 3” (140 mm x 76 mm) 
    • Maximum—9.5” x 6” (241 mm x 152 mm)
    • Maximum thickness—0.125” (3mm)
  • Input Processing Options
  • Sheet Feeders—591, 598
  • Cutters—310, 310 Stream, 380 Stream, 5410
  • Reading—2/5-I, 3/9, Code128, ECC200, OCR, Intelligent Mail barcode
  • Multi-channel input/matching capability
  • PCS input channels
  • Fold Options (Z, Half, Double Parallel and Letter)
  • Delivery Options
    • Envelope Turnover
    • Metering (fixed and variable weights)
    • Diverting
    • Envelope marking
    • High capacity envelope feeder option
    • Extended and on-edge conveyor options
    • Ink-jet printing
    • Envelope window reading (barcode, 2D and OCR)

Bell and Howell Mailstars Swing Arm Inserters For Sale

Symco Group buys and sells Bell and Howell Mailstar Swing Arm Inserters.

Bell and Howell Mailstar 500

Symco Group will provide a Bell and Howell Mailstar configured to meet your needs.

Call Symco Group today at 800-878-8002 or email us at info@symcogroup.com to purchase your next Bell and Howell Swing Arm Inserter.

Models:

  • Mailstar 350
  • Mailstar 400
  • Mailstar 450
  • Mailstar 500
  • Mailstar 2000
  • Pinnacle
  • Mailstar 10000

Inserter Stations:

  • 4 Inserts
  • 6 Inserts
  • 8 Inserts
  • 10 Inserts
  • 12 Inserts
  • or more…

Options:

  • Turnovers
  • Diverts
  • Conveyors
  • Meter Stand
  • Feeder
  • Accumulator Feeder Folder
  • Intelligence (2D, OMR, IMB, Etc)
  • Verification
  • Selective Feed
  • Print

Services:

  • Installation
  • Deinstallation
  • Rebuild
  • Parts

 

 

 

Bell and Howell Swing Arm Technician Needed…

Symco Group Position Available:
Symco Group is in the process of hiring for a part time Bell and Howell tech to work in our Buford, Georgia office rebuilding Bell and Howell Swing Arm Inserters to include Bell and Howell Mailstar 350, Bell and Howell Mailstar 400, Bell and Howell Mailstar 450, Bell and Howell Mailstar 500, Bell and Howell Mailstar 10000, etc.
This position has the potential to turn into a full time position with the right engineer.
Skills Required:
  • Capability of rebuilding swing arm inserters to a high level with deadlines.
  • Capability of troubleshooting and repairing issues with these inserters.
  • Capability of rebuilding auxiliary items such as conveyors, feeders, folders and accumulators
  • Capability of installing and testing intelligence and reading
  • Capability of deinstalling and preparing for shipping of completed inserter
  • Capability of installing at customer location of completed inserter.

 

Experience Required:
The perfect candidate lives in the Atlanta Georgia area and has a background of rebuilding swing arm inserters from manufacturers such as Bell and Howell / Pinnacle, Pitney Bowes, Mailcrafter and / or Sensible Technologies. The minimum requirement is someone who has provided ongoing break-fix repair on these machines for 5 or more years and has extensive knowledge of troubleshooting and upgrading.
Location:
Technician / Engineer will have to live in the Atlanta Georgia area and be able to commute to our office in Buford Georgia.
Compensation:
Our preference is to start out by paying on a “per machine” basis and then look at full time employment which will be dictated by quality of the product produced and time required to complete. We are also open to paying an hour wage based on time to rebuild and then looking at full time employment which again will be dictated by quality of the product produced and time required to complete. For installations and training, we pay a flat “per day rate” plus expenses.
If you are interested in this position, please send your resume to Symco Group at info@symcogroup.com.
www.symcogroup.com

Connect with Symco Group:
sig.png

Symco Group is looking to buy mail inserters

We are going through our inventory of swing arm inserters and accumulator / feeder / folders fast and have an immediate need to buy more.

If you have one or more working inserters or accumulator / feeder / folders for sale, please contact Symco Group today. Symco Group will arrange the shipping and removal of the equipment from your facility.

Looking for the following:

  • Bell and Howell Mastermailer 776 (Mailstar 350)
  • Bell and Howell MS400 (775)
  • Bell and Howell MS450 (Stretch 6 x 12)
  • Bell and Howell MS500 (A825)
  • Bell and Howell MS4000
  • Mailcrafters 1200 / 1200x
  • Mailcrafter 9800 / 9800L
  • Mailcrafters Edge II 9800 / 9800L

We are also looking to purchase the following accumulator feeder folders:

  • GBR 420 Accumulator Feeder Folder
  • GBR 438 Accumulator Feeder Folder

Contact Symco Group today at 800-878-8002 or email us at info@symcogroup.com. We would like to receive pictures of the inserter, page count and if there are any issues removing the equipment from your facility we need to be aware of ahead of time.

 

Bell and Howell Mailstar 450’s (Qty 2) For Sale

Symco Group has a client who is looking to sell two (2) Bell and Howell Mailstar 450 stretch, (6×12), Mail Inserters.

If you are interested in buying these Bell and Howell Mailstar 450’s or would like more information please contact Symco Group at 800-878-8002 or email us at info@symcogroup.com.

 

Customer Equipment For Sale…

Immediately available. If interested in one or more pieces, please contact Symco Group at 800-878-8002 or info@symcogroup.com

  • Cheshire 7000 Videojet System – Model 987000-81
    • includes 2 Videojet print mail wide array print heads
    • RSI DH3200 drying system
    • Cheshire TLS tabber / labeler
  • Bell and Howell 340-C8 Mail Inserter, 8 pocket with reliant friction stream feeder
  • 2004 Neopost SI92
    • 4 pocket
    • Cover feeder
    • Feed and Deliver