Bell and Howell Enduro Inserters For Sale – $25,000 each.

Symco Group has a customer who has two Bell and Howell ten station Enduro Inserters with Jet Vision cameras, high cap feeders and on edge conveyors for immediate sale.

If you have interest in one or both of the Bell and Howell Enduro Inserters, please contact Symco Group at 800-878-8002 or email us at info@symcogroup.com.

Bell and Howell Enduro Overview:

The Enduro inserting system will operate at speeds up to 11,000 envelopes per hour, depending on the configuration. These processing speeds make the Enduro inserting system a formidable solution for operations that process high volumes of one- to multiple- page, statement-type jobs in any environment where numerous applications are run on a regular basis.

Based on BÖWE BELL + HOWELL’s industry-renowned gripper-arm inserting technology and powered by the KOMPOS control system, the Enduro inserting system represents a new evolution in inserting technology.

Thanks to the integrated KOMPOS microprocessor and its plug-and-play design, the Enduro inserting system bring a new level of modularity to BÖWE BELL + HOWELL’s proven gripper-arm inserting technology. This opens the door to a broad and diverse range of add-on modules that can easily be integrated with the base system, including BÖWE BELL + HOWELL’s new line of dual-channel and cut-sheet feeders.

These modules, each with their own KOMPOS controller, communicate continously with the operating system to ensure complete mail piece integrity while improving performance levels by up to 40 percent on certain applications.

The Enduro inserting system features an integrated, intelligent learning technology known as Smart GRIP (Grip Remember Inform & Pull). With Smart GRIP, operators can activate a “teach” command through the user interface. In this mode, the gripper arm “reads” an insert, “remembers” the reference values and “reports” the thickness of the enclosures to the operating system.

As a job proceeds, each of the enclosures is compared to the stored values, and any processing errors—such as double pulls or misses are immediately identified. Since the operator can set the job to automatically bypass the mailpiece, use a backup enclosure feeeders, or stop for inspection integrity is enhanced and throughput maximized.

In addition to Smart GRIP, the Enduro inserting system offers pneumatic gripper arms. The pneumatic gripper arms, which can replace or be used in conjunction with the standard gripper arms, greatly increase the Enduro’s performance when processing difficult materials.

The Enduro inserting system may be configured with up to 24 insert stations. All enclosure feeders can be pneumatic, standard or any combination of both.

Additional improvements to the Enduro inserting system include:

  • Intelligent tracking throughout the document path
  • High-capacity envelope loader and high-capacity insert feeders
  • A redesigned insertion station
  • A new operating system and user interface
  • A high-volume, on-edge output conveyor

One system, multiple uses

The Enduro inserting system is built on BÖWE BELL + HOWELL’s modular design philosophy. This unique approach allows each system to be configured based on a customer’s specific requirements while affording the flexibility to add new capabilities as those needs evolve.

There are currently more than 100 paper-handling modules that can interface with the Enduro inserting system, ranging from roll feeders and continuous-form cutters to sheet feeders and heavy-duty folders. This multi-tool approach offers a greater freedom to process a growing number of jobs and enclosures while protecting their initial investments in technology.

Enhanced document integrity

To supplement the Enduro system checks for document tracking and integrity, BÖWE BELL + HOWELL’s VEKtor reading system can be added throughout the inserter. With VEKtor in place, barcodes can be read at the feeder and inserts verified in the hopper to ensure everything matches before continuing through the system. With VEKtor any code symbology is supported including the Intelligent Mail Barcode (iMB).

Highlights

  • Smart GRIP technology immediately identifies problem mailpieces
  • Pneumatic gripper arms increase ability to process difficult materials
  • Improved tracking of each mailpiece
  • Numerous add-on modules seamlessly work with the inserter

Features and specifications

  • Acceptable envelope sizes
    • Minimum—6” x 3.5” (152 mm x 89 mm)
    • Maximum—10”x 6.25” (254 mm x 159 mm)
    • Flap depth—1” to 2.31” (25 mm x 59 mm)
  • Acceptable insert sizes
    • Minimum—5.5” x 3” (140 mm x 76 mm)
    • Maximum—9.5” x 6” (241 mm x 152 mm)
    • Maximum thickness—0.125” (3mm)
  • Input Processing Options
  • Sheet Feeders—591, 598
  • Cutters—310, 310 Stream, 380 Stream, 5410
  • Reading—2/5-I, 3/9, Code128, ECC200, OCR, Intelligent Mail barcode
  • Multi-channel input/matching capability
  • PCS input channels
  • Fold Options (Z, Half, Double Parallel and Letter)
  • Delivery Options
    • Envelope Turnover
    • Metering (fixed and variable weights)
    • Diverting
    • Envelope marking
    • High capacity envelope feeder option
    • Extended and on-edge conveyor options
    • Ink-jet printing
    • Envelope window reading (barcode, 2D and OCR)

Looking to purchase GBR 420 and 438 Accumulator / Feeder / Folders

Symco Group is in the market to purchase GBR 420 and GBR 438 Smart Accumulator / Feeder / Folders.

If you have one or more for sale, please contact Symco Group at 800-878-8002 or email info@symcogroup.com. When emailing, please send pictures of units you have available.

GBR 420T Smart Feeder Folder

GBR 420T Smart Feeder Folder

The GBR 420T Smart Feeder/Folder, the premier folder of the mail industry, with installations worldwide, offers an economical and versatile solution to personalizing and inserting mail.

At a speed of up to 30,000 documents per hour, the 420T reads a wide variety of optical codes to accurately assembly documents into address-matched sets, up to five for a letter fold and seven pages for a half fold. The address matched sets are then folded for inserting directly into the gripper arm or open feed station of an inserter. With the added features of up to twelve stations of intelligent selection, dual metering with postal weight calculation and divert, envelope suppression and sequential start-up and shut down, it is easy to see why the 420T is the premier intelligent folder for the mailing industry.

The 420T can also operate off-line by simply purchasing the off-line conveyor option.

  • High folding capacity, up to five pages for a letter fold, seven pages for a half fold 
  • Advanced touch screen for BCR multiple job set-up and recall
  • Up to 30,000 documents per hour
  • Runs on-line with conventional, non-intelligent inserters
  • Up to twelve intelligent station selection
  • Intelligent read systems (OMR, 3 of 9, 128 and 2 of 5 interleaved barcodes) 
  • Envelope suppression and sequential start-up and shut down
  • Dual metering with postal weight calculation and divert
  • Operates off-line with conveyor option
  • Cut-sheet or optional continuous form feed

Specifications:

  • Speed:
    • Up to 30,000 documents per hour
  • Paper Supply:
    • Min / Max. Paper Size:
      • 7″ W x 7″ L
      • 8 1/2″ W x 11″ L
      • 8 1/2″ W x 14″ L
      • Optional: 11″ x 8 1/2″
    • Paper Weight:
      • 20-24 lb bond
      • Inquire for heavier weights
    • Paper Capacity:
      • 2,000 sheets
      • Optional: 6,500 sheets
    • Fold Types:
      • “C”
      • “Z”
      • “V”
      • Double “V”
  • Power Source:
    • 110 Volts, Single Phase, 60 Hz, 15 amp.
    • 220 Volts, Single Phase, 50 or 60 Hz, 10 amp (optional)
  • System Dimensions:
    • 120″ L x 26″ W x 52″ H
  • System Weight:
    • Approximately 400 lbs
  • Read Systems:
    • Line Code Read Systems (OMR)
    • Industry Standard Barcodes: 3 of 9, 128, and 2 of 5 interleaved
    • 2-D Barcode – DataMatrix
    • OCR/2-D Barcode
  • Other Features:
    • Large capacity top-loading, bottom feeder (approximately 1,500 sheets) and optional BSA 5000 Bulk Loader increases loading capacity to approximately 6,500 sheets.
    • Four plate folder with accumulation station for up to five pages for a letter fold or seven pages for a half fold.
    • Ultrasonic double detect, non-read, fixed count operation
    • Intelligent error display including mis-feed and jam detection
    • Counter modes: Total Count, Batch Count, Re-settable Count
    • Optional – Output conveyors
      • Shingling output conveyor/stacker
      • Transfer conveyor interface to gripper arm
      • Open feed station

GBR 438 Smart Feeder / Folder

GBR 438 Smart Feeder Folder

The 438 Smart Feeder/Folder is the highest quality intelligent feeder/folder system in the mail industry. Utilizing a heavy-duty folder with polyurethane/steel rollers, the 438 is designed for maximum productivity, 24-hour, seven day a week production.

The advanced touch screen adds the feature of operator programmable BCR multiple job set-up and recall. At a speed of up to 30,000 documents per hour, the 438 reads a wide variety of optical codes to accurately assemble documents into address-matched sets, up to eight pages for a letter fold and twelve pages for a half fold. The address matched sets are then folded for inserting directly into the gripper arm or open feed station of an inserter.

With the added features of up to twelve stations of intelligent selection, dual metering with postage weight calculation and divert, envelope suppression and sequential start-up and shut down, the 438 can convert a standard inserter into an intelligent system. The 438 also operates off-line by simply purchasing the off-line conveyor option.

The 438 Smart Feeder/Folder is the highest quality intelligent feeder/folder system in the mail industry. Utilizing a heavy-duty folder with polyurethane/steel rollers, the 438 is designed for maximum productivity, 24-hour, seven day a week production.

With the added features of up to twelve stations of intelligent selection, dual metering with postage weight calculation and divert, envelope suppression and sequential start-up and shut down, the 438 can convert a standard inserter into an intelligent system. The 438 also operates off-line by simply purchasing the off-line conveyor option.

  • Designed for maximum productivity, 24-hour, seven day a week mail production
  • High folding capacity, up to eight pages for a letter fold, twelve pages for a half fold
  • Advanced touch screen for BCR multiple job set-up and recall
  • Up to 30,000 documents per hour
  • Runs on-line with conventional, non-intelligent inserters
  • Up to twelve intelligent station selection
  • Envelope suppression and sequential start-up and shut down
  • Dual metering with postal weight calculation and divert
  • Cut-sheet or optional continuous form feed

Specifications:

  • Speed:
    • Up to 30,000 documents per hour
  • Paper Supply:
    • Min / Max. Paper Size:
      • 8 1/2″ W x 11″ L / A4 / 8 1/2″ W x 14″ L
      • Optional: 11″ x 8 1/2″
    • Paper Weight:
      • 20-24 lb bond
      • Inquire for heavier weights
    • Paper Capacity:
      • 2,000 sheets
      • Optional: 6,500 sheets
    • Fold Types:
      • “C”
      • “Z”
      • “V”
      • Double “V”
  • Power Source:
    • 220 Volts, Single Phase with a neutral
    • 208 Volts, Three Phase with a neutral
  • System Dimensions:
    • 106″ L x 26″ W x 58″ H
  • System Weight:
    • Approximately 725 lbs
  • Read Systems:
    • Line Code Read Systems (OMR)
    • Industry Standard Barcodes: 3 of 9, 128, and 2 of 5 interleaved
    • 2-D Barcode – DataMatrix
    • OCR/2-D Barcode
  • Other Features:
    • Optional – Bulk loader feeding capacity by 6,500 sheets
    • Accumulation station for up to 8 pages letter fold, 12 pages half fold.
    • Ultrasonic double detect, non-read, fixed count operation
    • Intelligent error display including mis-feed and jam detection
    • Counter modes: Total Count, Batch Count, Re-settable Count
    • Optional – Output conveyors
      • Shingling output conveyor/stacker
      • Transfer conveyor interface to gripper arm
      • Open feed station

 

 

 

 

PFE / Neopost Maximailer Intelligent Folder / Inserter For Sale

Symco Group has a client who is looking to sell their PFE / Neopost Maximailer. Immediately available.

If you are interested in purchasing this product or would like additional information, please contact Symco Group at 800-878-8002 or info@symcogroup.com.

PFE - Neopost Maximailer - Customer Photo (Actual Customer Photo)

Maximailer Product Overview

Folders

PFE - Neopost Maximailer Tower Folder

The powerful and versatile three plate folder is capable of producing all fold types for documents with virtually any address position. All folds are set automatically when a job is programmed. It is available with either 1 or 3 hoppers providing cascade capability and a maximum capacity of 1,000 sheets.

With the addition of the collate station and OMR, the intelligent Maximailer can accumulate up to 8 page documents before folding and adding required inserts. All models have a hand-feed option allowing pre-collated sets to be folded and inserted.

Insert Feeders

PFE - Neopost Maximailer Single Feeder

Our high capacity insert feeder holds up to 300 mail pieces and features a unique separator that can easily cope with a wide variety of inserts from a single 16lbs document up to a 4mm thick booklet. The hoppers may be loaded during running in order to maximize efficiency.

PFE - Neopost Maximailer Tower Feeder

Document Security

Each individual hopper on the Maximailer is equipped with an infra-red electronic double document detection system. This accurately measures both the thickness and length of each document, ensuring the integrity of your mailings.

Technical Specifications:

  • 1-9 stations (6 feeders & 3 sheet feeders)
  • Daily Post’ function for hand feed items
  • Handles stationery from 16lbs to 1/6” thick booklets
  • Collated packs up to 1⁄4” thick
  • Fully automatic fold and envelope settings
  • 20 User programmable job memories
  • Cycles at up to 4,500 filled envelopes per hour

Inserting Head:

  • Envelope Size:
    • Depth: 31/2” – 61/2”
    • Width: 6” – 103/8”
  • Insert Pack Thickness: 1/4”
  • Envelope hopper capacity: Up to 400 envelopes

Insert Feeder:

  • Material Size:
    • Depth: 3” – 6”
    • Width: 51/2” – 91/2”
    • Minimum Weight: Single sheet – 16lbs
    • Maximum Thickness: 1/6”
    • Hopper capacity: Up to 300 BREs

Folder:

  • Material Size:
    • Depth: 51/2” – 16”
    • Width: 51/2” – 9”
    • Weight: 16lbs – 32lbs single sheet
  • Up to 8 sheets 20lbs prior to folding
  • Hopper capacity: Up to 500 sheets