Kirk Rudy Tabber Model KR535

Symco Group has a client with a Kirk Rudy Tabber Model KR535 for sale.

If you have any interest, please contact Symco Group today at 800-878-8002 or email us at info@symcogroup.com.

KIRK RUDY KR535 SPECIFICATIONS:

Physical:

Length

50”

127 cm

Width

26”

66 cm

Height

70”

178 cm

Tabletop height

33”

84 cm

Crated Weight

800 lbs

363 kg

Electrical Requirements:

 

Electrical Requirements

Voltage

Amps

Hz

120 VAC

15

20/30

Maximum Operating Speeds:

 

Single Tabbing

30,000 pieces / hour

Double Tabbing

30,000 pieces / hour

Tab Head Specifications:

Length

29”

74 cm

Width

36.5”

93 cm

Height

14”

35 cm

Crated Weight

120 lbs

54 kg

Material Handling:

Tabs

Labels

Minimum: .75 round

Minimum: .38”W x.75”L

Maximum: 2.0 round

Maximum: 3”W x 2”L STD

**Tab Base Specifications

Length

50”

113 cm

Width

33”

84 cm

Height

26”

66 cm

Crated Weight

780 lbs

350 kg

Options:

5” base height adjustment (Hydra-li )

Narrow (1.25”) product handling

5” wide label kit

Fan-fold label kit

Magnetized label kits

Material Handling

Min Stock Size

Max Stock Size

ickness

3’ x 5’

13” W x 14”L (labeling only) 11”W x 14”L (tabbing/ labeling)

Single sheet up to .18” (.62” labeling only)

New Accufast Tabbers available through Symco Group

Looking to add, upgrade or replace your tabbing solution? Symco Group is an authorized reseller for Asmarc Accufast for their complete line of Addressing Printers, Tabbers, Labelers, Affixers and more. Contact Symco Group today (info@symcogroup.com or 800-878-8002) to purchase your next tabbing solution.

Asmarc Accufast manufacturers several models to fit all your needs.

Accufast ET:

Accufast ET

Tabs both booklets and self mailers in the correct spots automatically. Very little setup or operator interaction is required. Select the correct tab mode, load the proper tabs and feed pieces from whatever device you choose on the front end. When full, just clean out the waste and splice on another strip of tabs and go.

Accufast KT:

Accufast KT

Table top tabber that applies either a 1″ or 1.5″ tab at speeds of 15,000 per hour. The KT is a crash tabber module and must be used with a feeder. The KT is the entry level for a professional level tabbing solution. By combining the KT with an FX feeder and CS3 output conveyor it creates a robust tabbing solution for your business needs.

Accufast KT2:

Accufast KT2

The KT2 is the “big brother” to the KT. The KT2 takes care of twin tab requirements on thin forms in a single pass. Each tabbing head works independently of the other as they apply tabs to the leading edge of the pieces moving through the machine.

Accufast Freehand Tabber:

Accufast FreehandTabber

Simple unit with a built in feeder. The Freehand Tabber uses crash tab technology in which a tab is ejected in front of the piece and the piece crashes into it carrying the tab and the piece between a set of rollers where the tab is folded and sealed. The Freehand tabber is a perfect machine if you are only tabbing a few mailers and need a machine to get it done quickly.

Accufast Slim Jim System:

accufast KT_ET_HDF_inline5-2011_2

The Slim Jim system is the combination of the of the KT 1.5″ tabber running inline with the Accufast ET. The Accufast Slim Jim allows you to get the extra tab on a side at right angles to the initial side as it runs the piece through the ET and into the KT.

Accufast LDM:

Accufast LDM

Until now rolled tabs were available on either small (5-10,000) or large (40,000) tabs per roll. The small rolls were always running out and the large rolls were hard to handle. Either way, production suffered. The ACCUFAST LDM handles rolls of at least 75,000 tabs and delivers the tabs to the tabber smoothly and automatically. The rolls are easy to handle and rolls may be spliced one to the other to avoid rethreading (another production killer). Tabs are wound on a spool which simplifies handling and increases the tab count per roll. An adapter kit allows he LDM to be set up to run pancake rolls of less than 12 inches in diameter. This allows a mailer to use up his supply of old tabs prior to switching to the ACCUFAST spooled tabs.